Whatsapp
● online
- Kursi Meja Patio Piknik Outdoor / Kantin 1 Meja & ....
- Stainless Steel Test Tube Rack 15*50 Hole Bracket ....
- Digital Moisture Meter Kett PM600 Ex. Jepang 90+ P....
- Shower Eyewash with Room Station Hand & Foot Opera....
- Passbox Epoxy Full Set 100x100x50cm NMN Bisa Custo....
- Drill Extension Soil 8x30cm....
- Portable Tenis Lapangan Steel....
- Bangku / Tempat Duduk Olahraga PP02....
click image to preview
activate zoom
Hydrothermal Hidrotermal Autoclave Reactor & Teflon PTFE 50ml
Rp 1.400.000| Stok | Tersedia (1) |
| Kategori | Laboratorium, Lainnya |
Hydrothermal Hidrotermal Autoclave Reactor & Teflon PTFE 50ml
Hydrothermal Autoclave Reactor vessel kettle with PTFE Chamber Hydrothermal Synthesis 50ml
1.Technique Data:
(1) Operating temperature: 220°
(2) Working pressure: 3MPa (gauge)
(3) Heating, cooling rate: 5 c / min
(4) Specification 50 ml.
2. Feature:
The hydrothermal synthesis reactor using high-quality stainless steel processing. Kettle kettle lid body and sealed with durable, reliable cable seal structure, the sealing effect long-term stability without leakage.
The hydrothermal synthesis reactor with external heating, to reduce the volume and more favorable reaction in the same reactor operating temperature (such as multiple reactor placed in an oven heated).
3. Methods of operation:
The reaction means and the reactor body, and to ensure feeding coefficient is less than 0.8. When the Department of corrosive reaction when you want to put PTFE bush, can only be assured kettle body from corrosion. Hydrothermal synthesis reactor will be placed on the heater, in accordance with the provisions of the heating rate of heating to the desired reaction temperature (less than the required safety temperature). Completion of the reaction will be when its cool, but also in strict accordance with the provisions of the cooling rate operation, to facilitate the safety and reactor life. When confirmation of intra-abdominal temperature below the boiling point solvents reaction system can only open the tank lid after a follow-up operation.
Hydrothermal synthesis reactor each time after use to clean, to avoid corrosion.
Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to the bumps.
Hydrothermal Hidrotermal Autoclave Reactor & Teflon PTFE 50ml
| Berat | 3000 gram |
| Kondisi | Baru |
| Dilihat | 189 kali |
| Diskusi | Belum ada komentar |
Tanyakan stok dulu sebelum membeli ya
*Harga Hubungi CS
Meja Laboratorium 190×80 Kayu Ukuran : 1900 x 800 x 800 mm Meja Kerja : Kayu Keras Tebal Body Rangka : Besi UNP Tebal dilapis cat epoxy Menggunakan 4 roda, agar mudah dalam perpindahan Meja Super Kokoh, kekuatan roda dapat menahan beban hingga 1,2 ton
*Harga Hubungi CS
Meja Timbang Anti Gentar 100×100 Balance Table for Analytical Balances Top Table Full Granite Rangka : Besi tebal Lapis Cat Vibration Isolation, Karet Tebal, Ex, Lokal Rangka : Besi Tebal Dimensi : 1000x1000x900mm Berat : ± 350 kg
Rp 14.000.000
Bahan Meja Stainless Steel 304 Knockdown system, With Solid Undershelf Dimensi : ± 1000 x 700 x 900 mm
*Harga Hubungi CS
Lemari Asam HEAD HPL 100x60x120 Teflon 6mmUkuran : 1000 x 600 x 1200 mmMaterial Body : Multiplex 18 mm lapis HPLMeja Kerja : Teflon 6mmModel : Bagian atas saja (Head only)Untuk di atas meja yang telah ada di ruangan/LabAir Flow 2100 m3/h, 2850 rpmPintu atas spiral balances dapat diatur naik turun diketinggian manapun Wajib packing… selengkapnya
Rp 15.200.000
Barang ini Produksi Saat Order, Lama Produksi tergantung Barang, ISB-8 Fiberglass LP1Q 6mm Body : Multiplex 18mm, Full High Pressure Laminate Top Table : Fiberglass LP1Q 6mm Dimensi : 2400x1200x850mm 6 Pintu, 12 Laci
*Harga Hubungi CS
(Tempat kerja Steril menggunakan HEPA dan Lampu Ultraviolet) Horizontal : Hembusan angin steril dari dalam ke luar Multiplex 18 mm dilapisi dengan HPL UV Lamp, TL Lamp Meja kerja Stainless steel 304 Complete with blower, Pre Filter dan HEPA filter bersertifikat Dimensi HEPA : 305x305x70mm. DOP 99.999% at 0.3 μm. Dimensi Luar : ±455x650x1000 mm… selengkapnya
*Harga Hubungi CS
Pass Box Epoxy 60x60x50 cm Listrik+Lampu UVC+Lampu TL+Interlock Door Dimensi : 600x600x500mm ( Lebar x Tinggi x Kedalaman ) Material : Epoxy Pintu Interlock Door (Jika 1 Pintu terbuka, 1 Pintu pasti tertutup) Electromagnetic Door 1 Unit Lampu Ultraviolet 1 Unit Lampu TL 1 Pintu sebagai Aktif, Mengirim material (Mengatur Power, Lampu UV, TL, dan… selengkapnya
Rp 8.000.000
Listrik+Lampu UVC+Lampu TL+Interlock Door Dimensi : 400x400x400mm ( Lebar x Tinggi x Kedalaman ) Material : Steel lapis Epoxy ketebalan 1.2mm Pintu Interlock Door (Jika 1 Pintu terbuka, 1 Pintu pasti tertutup) Electromagnetic Door 1 Unit Lampu Ultraviolet 1 Unit Lampu TL 1 Pintu sebagai Aktif, Mengirim material (Mengatur Power, Lampu UV, TL, dan buka… selengkapnya
*Harga Hubungi CS
Belum ada komentar, buka diskusi dengan komentar Anda.